|
Product Details:
|
| Input Voltage(v): | AC/DC12V | Light Source: | LED |
|---|---|---|---|
| Lamp Luminous Efficiency(lm/w): | 90 | Ip Rating: | IP 68 |
| Lamp Body Material: | Stainless Steel | Certification: | CE |
| Application: | Underwater | Base Type: | Wall Hanging |
| Warranty: | 2 Years |
Pool LED Lights 36W Flat Walll Mounting RGBW Multi-color Synchronized 12V IP 68
| Matterial | Stainless steel+ rubber ring |
| Light source & power | 36W |
| Working voltage | AC/DC 12V |
| Installation | Wall mounted |
| Color | Warm white, Cold white, RGBW with remote, RGBWW with remote |
| Application | Swimming pool |
| Waterproof standard | IP68 |
| Life time | 50,000 hrs |
| Dimension | D300xH70mm |
| Cable | 1.5 meter |
| Warranty | Two years |
| Lumen | 97lm/W |
Applications:
It is used in swimming pools, fountains, scenic ponds' illumination and decoration.
Features:
1. Adopt super-high bright LED as the light source and any single color is available, like red, green, blue, yellow, white and RGB colors. It is remote control.
2. Adopt thick glass as the body shell which is corrosion resistant and quick heat dispelling.
3. It is IP68
4. Longer life-span, above 50, 000 hours.
5. Low consumption, energy saving and environmental protecting.
Installation procedure
1. Screw the bracket into the wall
2. Mount the clip of the bracket into the hole of the light
3. Screw the detailed illustrations in the below pictures
Cautions
1. Work with AC12V, otherwise the light will be possibly damaged
2. This light should be installed not deeper than 50cm underwater
3. The power wire of the lights shall be joined with other power wire out of the water. Waterproof treatment should be done if the joint is in the water otherwise there is risk for water intrusion.
4. The light should be in the water for the test of remote function or other functions, and don't test it more than 3 minutes out of the water otherwise the light will be possibly damaged or caused disfunction. If the user is not available to test it in the water, then please shut off the light every 3 minutes to be cold for the new test.
Contact Person: Allan
Tel: +8618029273573
